JD-606
In-Foil Metal Detector
In the food and pharmaceutical industries, an increasing number of products are packaged in aluminium foil, including bagged foods, condiments, nuts, coffee, and similar items. This type of packaging exhibits moisture-resistance, freshness-retention, and barrier properties. But the metallic character of the packaging material itself also causes significant interference with conventional metal detection equipment, resulting in a reduction in detection sensitivity or the complete absence of reliable detection.
- Detection Accuracy: Iron (Fe) ≥ 0.8 mm;
- Copper (Cu) ≥ 1.0 mm;
- Stainless Steel (SUS304) ≥ 1.5 mm
Anti-interference detection technology is implemented by the in-foil metal detector. This effectively mitigates the influence of aluminium foil packaging on conventional metal detection equipment, thereby facilitating the precise identification of metal contaminants within the package.
Conventional metal detection equipment is easily disrupted by the packaging signal, as aluminium foil packaging possesses distinct electromagnetic properties. This is the reason why the JD-606 employs a designated signal-processing method and detection structure for aluminium foil applications. The abnormal signal that a target metal contaminant generates in the product is distinct from the baseline signal of a typically packaged product.
| Item | JD-606 In-Foil Metal Detector |
| Detection principle | Electromagnetic induction |
| Detectable metals | Iron (Fe), copper (Cu), stainless steel, etc. |
| Construction | SUS304 stainless steel; SUS316 on request |
| Line height | 700 ± 50 mm |
| Aperture size | W 400 × H 120 mm |
| Detection sensitivity | Fe ≥0.8 mm; Cu ≥1.0 mm; SUS304 ≥1.5 mm |
| Performance | Actual performance must be confirmed by sample testing, taking into account product height, packaging material, product temperature and humidity, and conveyor speed. |
| Conveyor speed | Fixed 28 m/min |
| IP rating | IP65 |
| Power | Single-phase 220 VAC, 50 Hz / 200 W |
-
Pusher RejectorHeavier, stably packed products: vacuum-packed meat, frozen foods, bread, pharmaceutical packs. A pneumatic cylinder pushes the rejected product off the main conveyor.
-
Air-Blast RejectorLight products on fast lines: tea, seasonings, small food pouches.
A high-speed air jet blows the rejected product clear of the conveyor. -
Flap RejectorMedium-weight products whose packaging must stay intact: chocolate boxes, cartoned foods, frozen packs. A flap changes the product's conveying direction, diverting it smoothly without collisions.
-
Flipper RejectorSmall to medium packs: biscuits, tea, pharmaceutical packs. A flipper sweeps the rejected product off the main conveyor.
-
Mid-Section Lift RejectorVacuum-packed and high-value foods where appearance and packaging matter. The middle conveyor section raises or lowers so the product leaves the line gently, minimizing impact and pack damage.
-
End-of-Line Lift RejectorHeavy products that need their packaging protected: steaks, large food bags, gift boxes. The end conveyor section raises or lowers to change the product's direction.
-
Conveyor Stop AlarmFlour sacks, rice bags and other large-format products. The conveyor stops and an alarm sounds so an operator can remove the product by hand.
Most providers list fewer than seven possibilities. The practical benefit is that the reject method may be tailored to the pack rather than the pack being pushed onto whatever rejector is available, which is especially important for vacuum packs, gift boxes, and other products where a rough rejection harms salable goods.
- Aperture size
- Belt width and length
- Belt height above floor
- Reject collection device
- Belt material
- Adjustable conveyor speed
- IP65 / IP66 / IP69K protection
- Automatic rejector
- SUS304 / SUS316 stainless steel construction
- Audible and visual alarm

















