JD-603
Inclined Conveyor Metal Detector
The production environment and equipment degradation can introduce iron, copper, and stainless steel contaminants during the production process. However, production equipment is not always installed at the same height. Floor space is restricted, necessitating the lifting of the product to the subsequent machine or its transfer between floors.
The JD-603 inclined conveyor metal detector inspects the product as it raises it, allowing for the height change and inspection to be performed by a single machine, rather than the addition of a distinct transfer conveyor.
- Detection Accuracy: Iron (Fe) ≥ 0.8 mm;
- Copper (Cu) ≥ 1.0 mm;
- Stainless Steel (SUS304) ≥ 1.5 mm
- Adapted to the height discrepancy of your line. A direct connection between upstream and downstream equipment is maintained by setting the incline angle between 10° and 25°, which ensures continuous product movement and inspection.
- Solves a layout issue, not merely a detection issue. It is suitable for locations where the installation space is limited or where connecting machines are situated at varying elevations.
The detector employs electromagnetic induction. A detection field is generated and monitored within the aperture by the coils. The system analyses the signal to identify a metal contaminant that disturbs the field.
| Item | JD-603 Inclined Conveyor Metal Detector |
| Detection principle | Electromagnetic induction |
| Detectable metals | Iron (Fe), copper (Cu), stainless steel, etc. |
| Construction | SUS304 stainless steel |
| Line height | 700 mm |
| Aperture size | W 400 × H 100 mm |
| Incline angle | 10°–25° |
| Detection sensitivity | Fe ≥0.8 mm; Cu ≥1.0 mm; SUS304 ≥1.5 mm |
| Performance | Actual performance is confirmed by sample testing and depends on product height, packaging material, product temperature and humidity, and conveyor speed. |
| Conveyor speed | Fixed 20 m/min; adjustable 15–30 m/min |
| IP rating | IP65 standard |
| Power | Single-phase 220 VAC or 110 VAC, 200 W |
-
Pusher RejectorHeavier, stably packed products: vacuum-packed meat, frozen foods, bread, pharmaceutical packs. A pneumatic cylinder pushes the rejected product off the main conveyor.
-
Air-Blast RejectorLight products on fast lines: tea, seasonings, small food pouches.
A high-speed air jet blows the rejected product clear of the conveyor. -
Flap RejectorMedium-weight products whose packaging must stay intact: chocolate boxes, cartoned foods, frozen packs. A flap changes the product's conveying direction, diverting it smoothly without collisions.
-
Flipper RejectorSmall to medium packs: biscuits, tea, pharmaceutical packs. A flipper sweeps the rejected product off the main conveyor.
-
Mid-Section Lift RejectorVacuum-packed and high-value foods where appearance and packaging matter. The middle conveyor section raises or lowers so the product leaves the line gently, minimizing impact and pack damage.
-
End-of-Line Lift RejectorHeavy products that need their packaging protected: steaks, large food bags, gift boxes. The end conveyor section raises or lowers to change the product's direction.
-
Conveyor Stop AlarmFlour sacks, rice bags and other large-format products. The conveyor stops and an alarm sounds so an operator can remove the product by hand.
Most providers list fewer than seven possibilities. The practical benefit is that the reject method may be tailored to the pack rather than the pack being pushed onto whatever rejector is available, which is especially important for vacuum packs, gift boxes, and other products where a rough rejection harms salable goods.
- Aperture size
- Belt width and length
- Reject collection bin
- Belt material
- Adjustable conveyor speed
- IP65 / IP66 / IP69K protection solutions
- Automatic reject mechanism (rejector)
- SUS304 / SUS316 Stainless Steel Construction
- Audible and visual alarm system
- Incline angle
















